HGMM-150

Hi-Rel Grade, AC/DC Non Isolated PFC, 150 W

General Characteristics

Additional functions : on/off, reference voltage, companion module drive control
External synchronization range : no synchro
Galvanic isolation input/output : non isolated
Nominal power up to : 150 W
Protections : output short circuit, over power, over temperature
Switching frequency : 250 Khz
Trim adjustment : no trim
Leaded only

Key Features

Active PFC
Dedicated for 115 Vac applications
Low input current harmonic distortion < 10%
MIL-STD-704, DO-160, ABD-100, MIL-STD-1399 compliant
Standard half brick package

Series Description

The GAIA Converter HGMM-150 designates a family of non isolated AC/DC power factor corrected modules. The HGMM-150 family is designed to be compatible with the latest airborne single phase input bus 115 Vac / 400 Hz for fixed and variable frequency. The modules accept an AC input voltage ranging from 95 Vac to 140 Vac and include active power factor that enables a very low level of current harmonic distorsion.
Read more ...

Product Selection

This product selection table includes all available versions. Other references may be offered – see technical datasheets.
For more information, please consult factory.

Reference	Status	Output power	Input voltage	Max. transient input voltage	Switching frequency	Case dimensions	Standard electrical functions	Operating case temp. range	Case material	Isolation voltage	Efficiency	Weight	Options

HGMS-150-W-T	Active	150 W	95 - 140 Vac	180.0 Vac / 100 ms, 71.0 Vac / 15 ms	250 KHz	61.15 x 58.11 x 12.7 mm	OPP, SCP, OTP	-40 to 105 °C	Aluminium alodined coating / Copper with tin finishing	N/A	90 %	110 Grams	S
No data

Output Nbr: S: Single output, B: Bi-outputs, D: Dual outputs, T: Triple outputs – Dual outputs products can be usable for single output or bi-outputs. Output Nbr E corresponds to a slave module (see DataSheet)
Case dimensions: L x W x H (maximum values in mm)
Standard electrical functions: Case: Case connection, OVLO: Input overvoltage lockout, UVLO: Input under voltage lockout, OCP: Output over current protection level, OPP: Output over power protection, OVP: Output over voltage protection level, SCP: Output short circuit protection, OTP: Over temperature protection, VIF: Pin for Input Current Ripple Reduction, SYNC: Pin for Synchronisation, TRIM: Pin for adjust ouput voltage, ITRIM: Pin for adjustement ouput current limitation, CC: Pin for capacitor charged signal, CD: Pin for capacitor discharged signal, UVLOadj: Pin for level undervoltage lockout adjust, VREF: Pin for output internal voltage reference, PF: Pin for power fail signal, SENSE: Pin for voltage regulation, REV.POL: Reverse polarity protection, SHARE: Pin for output current parallel sharing
Status NPR: Not preferred for new Design
Options: T Screening at start-up -55° C, Y High isolation 3000 Vdc, M On/Off function, S Screening and serialization, F Synchronization function, P Share function

Technical Documentation

Pin Out

Materials Disclosure Disclaimer

Even though all possible efforts have been made to provide you with the most accurate information, we can not guarantee to its completeness and accuracy due to the fact that the data has been compiled based on the ranges provided and some information that may not have been provided by the subcontractors and raw material suppliers to protect their business proprietary information.