FGDS-12A-100V
Hi-Rel Grade, DC/DC EMI Filter, 12 A - 100 V
General Characteristics
- Galvanic isolation input/output : non isolated
- Input current up to : 12 A
- Nominal power up to : 175 W
- Wide input range : 9-100 Vdc
- RoHs
Key Features
- DO-160 C/D/E/F/G compliant
- EMI filter for Avionics/Defense
- Input immunity to MIL-STD-1275 A/B/C/D
- Input immunity to MIL-STD-704 A/D/F
- MIL-STD-461 D/E/F compliant
Series Description
The GAIA Converter filter module FGDS-12A-100V provides a state-of-the-art product to fulfill Electromagnetic Interferences (EMI) requirements for Aerospace and Defence applications. The FGDS-12A-100V is a very compact and low loss solution for applications requiring up to 12 A input current.
It embbeds circuit that avoid internal capacitor to produce inrush current at start-up.
The FGDS-12A-100V complies with major standards including:
- the US MIL-STD-461 rev D, E and rev F
- the international DO-160 rev C, D, E, F & rev G.
In addition, thanks to its 100V permanent capability, the filter complies with: MIL-STD-704A/D/E/F with up to 80V/100ms MIL-STD-1275A/B/C/D with up to 100V/50ms.
The FGDS-12A-100V is suitable for MGDD serie DC/DC converters and DC architecture:
- from 10W up to 300W output power
- up to 12A output current
- up to 100V permanent input voltage.
The FGDS-12A-100V is the ideal companion to the GAIA Converter MGDD series.
In particular, the filter module is compliant with the following requirements of MIL-STD-461D/E/F/G and DO-160-C/D/E/F/G standards:
- MIL-STD-461D/E/F Part 2. & 3. requirements:
. Conducted Emission (CE)
> CE102, power leads, emission over 10KHz to 10MHz, basic curve
. Conducted Susceptibility (CS)
> CS101, power leads, frequency 30 Hz to 150 KHz, curve #1,
> CS114, bulk cable injection, frequency 10 KHz to 400 MHz,
> CS115, spikes, bulk cable injection calibrated spike
> CS116, damped sinusoidal transient
- DO-160-C/D/E/F/G requirements:
. Conducted Emission (CE)
> Section 21 power lines, emission over 15 KHz to 152 MHz, category B, AZ & LMH
. Conducted Susceptibility (CS)
> Section 20 power lines, frequency 10 KHz to 400 MHz
Read more ...The FGDS-12A-100V complies with major standards including:
- the US MIL-STD-461 rev D, E and rev F
- the international DO-160 rev C, D, E, F & rev G.
In addition, thanks to its 100V permanent capability, the filter complies with: MIL-STD-704A/D/E/F with up to 80V/100ms MIL-STD-1275A/B/C/D with up to 100V/50ms.
The FGDS-12A-100V is suitable for MGDD serie DC/DC converters and DC architecture:
- from 10W up to 300W output power
- up to 12A output current
- up to 100V permanent input voltage.
The FGDS-12A-100V is the ideal companion to the GAIA Converter MGDD series.
In particular, the filter module is compliant with the following requirements of MIL-STD-461D/E/F/G and DO-160-C/D/E/F/G standards:
- MIL-STD-461D/E/F Part 2. & 3. requirements:
. Conducted Emission (CE)
> CE102, power leads, emission over 10KHz to 10MHz, basic curve
. Conducted Susceptibility (CS)
> CS101, power leads, frequency 30 Hz to 150 KHz, curve #1,
> CS114, bulk cable injection, frequency 10 KHz to 400 MHz,
> CS115, spikes, bulk cable injection calibrated spike
> CS116, damped sinusoidal transient
- DO-160-C/D/E/F/G requirements:
. Conducted Emission (CE)
> Section 21 power lines, emission over 15 KHz to 152 MHz, category B, AZ & LMH
. Conducted Susceptibility (CS)
> Section 20 power lines, frequency 10 KHz to 400 MHz
Product Selection
This product selection table includes all available versions. Other references may be offered – see technical datasheets.
For more information, please consult factory.
| Reference | Status | Output power | Input voltage | Max. transient input voltage | Output current | Case dimensions | Standard electrical functions | Operating case temp. range | Case material | Inrush current limiter | DC resistance | Weight | Power dissipation | Options | RoHS / SnPb |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CARTE PLFG | Active | 12 A - 100 V | 4.5 - 100 Vdc | 100.0 Vdc / 100 ms | 12 A | 32.7 x 26.2 x 8.2 mm | ICL | -40 to 105 °C | Plastic | 30 mOhm | 10 Grams | S |  |
Output Nbr: S: Single output, B: Bi-outputs, D: Dual outputs, T: Triple outputs – Dual outputs products can be usable for single output or bi-outputs. Output Nbr E corresponds to a slave module (see DataSheet)
Case dimensions: L x W x H (maximum values in mm)
Standard electrical functions: Case: Case connection, OVLO: Input overvoltage lockout, UVLO: Input under voltage lockout, OCP: Output over current protection level, OPP: Output over power protection, OVP: Output over voltage protection level, SCP: Output short circuit protection, OTP: Over temperature protection, VIF: Pin for Input Current Ripple Reduction, SYNC: Pin for Synchronisation, TRIM: Pin for adjust ouput voltage, ITRIM: Pin for adjustement ouput current limitation, CC: Pin for capacitor charged signal, CD: Pin for capacitor discharged signal, UVLOadj: Pin for level undervoltage lockout adjust, VREF: Pin for output internal voltage reference, PF: Pin for power fail signal, SENSE: Pin for voltage regulation, REV.POL: Reverse polarity protection, SHARE: Pin for output current parallel sharing
Status NPR: Not preferred for new Design
Options: T Screening at start-up -55° C, Y High isolation 3000 Vdc, M On/Off function, S Screening and serialization, F Synchronization function, P Share function
Technical Documentation
Pin Out
Materials Disclosure Disclaimer
Even though all possible efforts have been made to provide you with the most accurate information, we can not guarantee to its completeness and accuracy due to the fact that the data has been compiled based on the ranges provided and some information that may not have been provided by the subcontractors and raw material suppliers to protect their business proprietary information.