FLHG-60
Hi-Rel Grade, DC/DC Input Bus Conditioner, 60W
General Characteristics
- Dedicated for Avionics/Military Applications
- Galvanic isolation input/output : No Isolation
- Nominal power up to : 60 W
- RoHs
Key Features
- Hold-up function
- Inrush current limitation
- Integrated EMI filter
- Reverse polarity protection
- Ultra wide input range
- UnderVoltage Lock-Out
Series Description
Product Selection
This product selection table includes all available versions. Other references may be offered – see technical datasheets.
For more information, please consult factory.
| Reference | Status | Output power | Input voltage | Max. transient input voltage | Switching frequency | Output voltage | Output current | Min. transient input voltage | Case dimensions | Standard electrical functions | Adj. hold-up capa final voltage | EMI Filter | Hold up mode threshold voltage | Operating case temp. range | Case material | Inrush current limiter | Max drop out in nomal mode | Charger switching frequency | Max power in drop out operation | DC resistance | UVLO min | Synchronization freq. range | Voltage drop @ I max | Weight | Synchronization | Transient elevator | Power dissipation | Options | RoHS / SnPb |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FLHG60MN | Active | 60W | 10.7 - 100 Vdc | 40.2 x 26.2 x 8.2 mm | MIL-STD-461 | -40 to 105 °C | Metallic black anodized coating | 0.7 Vdc 1.3 Vdc | 23 Grams | N | N | T, S |  |
Output Nbr: S: Single output, B: Bi-outputs, D: Dual outputs, T: Triple outputs – Dual outputs products can be usable for single output or bi-outputs. Output Nbr E corresponds to a slave module (see DataSheet)
Case dimensions: L x W x H (maximum values in mm)
Standard electrical functions: Case: Case connection, OVLO: Input overvoltage lockout, UVLO: Input under voltage lockout, OCP: Output over current protection level, OPP: Output over power protection, OVP: Output over voltage protection level, SCP: Output short circuit protection, OTP: Over temperature protection, VIF: Pin for Input Current Ripple Reduction, SYNC: Pin for Synchronisation, TRIM: Pin for adjust ouput voltage, ITRIM: Pin for adjustement ouput current limitation, CC: Pin for capacitor charged signal, CD: Pin for capacitor discharged signal, UVLOadj: Pin for level undervoltage lockout adjust, VREF: Pin for output internal voltage reference, PF: Pin for power fail signal, SENSE: Pin for voltage regulation, REV.POL: Reverse polarity protection, SHARE: Pin for output current parallel sharing
Status NPR: Not preferred for new Design
Options: T Screening at start-up -55° C, Y High isolation 3000 Vdc, M On/Off function, S Screening and serialization, F Synchronization function, P Share function
Technical Documentation
Pin Out
Materials Disclosure Disclaimer
Even though all possible efforts have been made to provide you with the most accurate information, we can not guarantee to its completeness and accuracy due to the fact that the data has been compiled based on the ranges provided and some information that may not have been provided by the subcontractors and raw material suppliers to protect their business proprietary information.